Site Search

Category:
Keyword:

Would you like more information emailed to you on any of these products?

Place a check mark next to the items you are interested in and submit the form below.

Your Name:
Phone Number:
Email Address:
Company Name:
Address:

 

CONTACT US




Name: Jonathan McLachlan
Email:

jonathan@skookum.com.au

Ph: 1-800-600 053
Cell: +64 276 488 488
Web:

www.skookum.com.au
Contact Us
 

Sawmilling

2 Knee McKeeCo Carriage
2 Knee McKeeCo Carriage Code: 1398
2 Knee McKee Co Carriage - Cable Drive - Panogram Arm - 4.2m Long Carriage Located in Australia



 
3 Knee Kockums Carriage
3 Knee Kockums Carriage Code: 1399
3 Knee Kockums Carriage - Cable Drive - Patograph Arm - Includes DC Cable Drive Motor 110kW Located in Australia



 
6-Spindle Ledinek Planer & Moulder
6-Spindle Ledinek Planer & Moulder Code: 5002
6-Spindle Ledinek Planer & Moulder Profiles 220 6V-S100 This robust machine is suitable for production of different moulded wooden elements in joinery and building industry. PROFILES provides excellent moulded or planed surface finish on different ...



 
Avon Fan
Avon Fan Code: 1366
Avon Fan 30cfm 1480 rpm Inlet 630mm Ø Outlet 540mm x 470mm 75kW Has surface rust, but very sound housing.



 
BioLuma™ 2900LV Sensor
BioLuma™ 2900LV Sensor Code: E-215 BioLuma
HD colour vision combined with HD laser profiling at the highest scan rate - the best overall performance for sawmill transverse scanning Advanced Transverse Scanning: HD Colour Vision + HD Laser Profiling HD colour vision and HD laser profiling in a single, ...



 
BM&M Wood Chip Screen
BM&M Wood Chip Screen Code: 1402
BM&M Wood Chip Screen (2x available) Purchased 1996



 
Boiler
Boiler Code: 1372
Age: 2005 Model no: 3MW 1100 Maxitherm Low Water Level: 40mm of visible glass Extra Low Water Level: 25mm of visible glass Boiler High Water: +80mm from half glass Normal Water: Half glass Safety valve setting: 10.3 bar Steam modulating controller: 8.5 ...



 
Brewer Machinery Combination Edger
Brewer Machinery Combination Edger Code: 1428
Machinery Consists of: • Brewer Docking Saw • Brewer Infeed (with kicker to rotate cant) • Brewer Combination Saw • Spare Saw guides and saws • Electrics



 
Bruks Butt Reducer
Bruks Butt Reducer Code: 2114
Bruks Butt Reducer Fully Refurbished, Cleaned and Painted - All Bearings Replaced - New Diablo Roller Flights



 
Cambio 460 Debarker (18
Cambio 460 Debarker (18") Code: CAMBIO-460-DEBARKER
Cambio 460 is a debarker for small logs up to 460mm (18"). It operates at feed speeds up to 90 m/min. (295 feet/min.) Its simplicity, reliability, low service requirement and operating costs makes Cambio 460 the winner in its class for sawmills and log yards around ...



 
Chip Bins
Chip Bins Code: 1404
Two Chip Bins available after Christmas.



 
Clam Shell Storage Bin with Bucket Elevator
Clam Shell Storage Bin with Bucket Elevator Code: 1435
- Double clam shell bin - Height of the bin is around 6.4m high x 3.0m wide x 6.5m long - Approx. 110-120m3 capacity - Has a levelling screw mounted to the top, hydraulic operation for the clam shell doors, and platforms to access all drive motors



 
CML SCA 450 T 500 Multirip Ripsaw
CML SCA 450 T 500 Multirip Ripsaw Code: 2200
Serial Number: 20694 Main Motor HP: 100 Maximum Cutting Thickness: 130 mm Blade Dia. max/min: 400/300 mm Contact for more technical data.



 
Donaldson Torit Baghouse
Donaldson Torit Baghouse Code: 1371
Currently erected on site (No rotary valve or fan).



 
Edwards Chip Screen
Edwards Chip Screen Code: 1403
Edwards Wood Chip Screen



 
Enerpat YT-145 Log Shavings Machine
Enerpat YT-145 Log Shavings Machine Code: 1427
Bought new, with only two weeks of use. - Perfect for shaving round woods - Ideal for firewood 12-14cm - 100% Automatic - Conveyor carrying shavings out - Blades changed very easily - Anti-jamming system - Safety Alarm - CE certified Specs: Max. Log Input ...



 
Erjo HSMF 704
Erjo HSMF 704 Code: 2104
Erjo drum chipper type HSMF 704 from 2006 with horizontal infeed. Drum width: 700 mm Drum diameter: 600 mm No of knives: 4 Size of electrical motor: 75 kW Capacity 20-50 m3 chips per hour



 
Fan
Fan Code: 1367
Fan Inlet 500mm Ø Outlet 450mm x 500mm 22kW



 
Gibson One Man Bench
Gibson One Man Bench Code: 1460
Gibson One man Bench Has been out of operation for 5 years but kept undercover. Includes a hydraulic powerpack. Machinery as is, where is.



 
IWD Tital VK-10 Strapping Machine
IWD Tital VK-10 Strapping Machine Code: 2186
AUD $22,000 SPECIAL Strapping Machine, Height 3400mm - Width 2100mm



 
McCormack Demby Timber - Site & Equipment
McCormack Demby Timber - Site & Equipment Code: 1378
Site with Log Yard, Sawmill, Drymill, Reman, Heat Plant, Kilns and 50 Acres of land as a Going Concern



 
Pressure Treatment Plant
Pressure Treatment Plant Code: 1441
Timber Treatment Plant Unknown pressure cylinder Stainless drip tank 2x21,000c working tanks “base of cylinder” Electrical operators console 3 x 1000c Tots with CCCA ( now mixed in working tanks) Ex. Country QLD



 
SOLD - Mikropul Baghouse & Fan - SOLD
SOLD - Mikropul Baghouse & Fan - SOLD Code: 1429
• Serial Number AV3674-2066 • Model 55W-10-15 • Explosion vent included for extra safety



 
SOLD - Miltec MTS 1500 Bed Grinder - SOLD
SOLD - Miltec MTS 1500 Bed Grinder - SOLD Code: 2120
Miltec MTS 1500



 
SOLD - MVM Capri AF 1500 Magnetic Bed Grinder - SOLD
SOLD - MVM Capri AF 1500 Magnetic Bed Grinder - SOLD Code: 2121
MVM Capri AF 1500 Magnetic Bed Grinder



 
SOLD - Scancore Scanner and Weining Rainman Multi-Rip Saw Profirip 450 - SOLD
SOLD - Scancore Scanner and Weining Rainman Multi-Rip Saw Profirip 450 - SOLD Code: 1401
Scancore Scanner Weining Rainmann Multirip Saw - Profirip 450 Conveyors to Suit EXCELLENT USED CONDITION



 
Stratoplan High Speed Planing Machines
Stratoplan High Speed Planing Machines Code: Stratoplan
Planing at Tempo 450 to 1000 m/min Great features that make woodworking accurate and perfect.



 
T720 OPT (Omga) Optimised Docker
T720 OPT (Omga) Optimised Docker Code: 1379
Programmable automatic upstroking machine for defecting and optimising wood.



 
TasEng Edger
TasEng Edger Code: 1400
TasEng Edger and Set Works - 4 Saws (1 fixed and 3 moving) - Outfeed Rollcase - Manual Infeed - Dust Extraction Fan - Hydraulics and Controls Located in Australia



 
WSM Hogger - Refurbished
WSM Hogger - Refurbished Code: 2187
AUD $ 20,000 SPECIAL West Salem Machinery Hogger Model 2432B Serial No. 5901104



 

New Equipment

Surround Systems TWA 2000 Series
Surround Systems TWA 2000 Series Code: TWA-2000-Series
The TWA-2000 Surround Metal Detector Systems with proven MP-4 Digital Technology provide superb reliability and unmatched performance. The TWA-2000 Series Metal Detectors are the number one systems in the industry and they are proven to be the best investment you will ...



 

Used Equipment

LSI Stacker
LSI Stacker Code: 1394
LSI Stacking system including: Unscrambler Singulator High Low Chain Alternate ending Adjustable layer maker Layer forks Hoist Outfeed Packet Deck Electrics and controls Building The stacker and building is available for immediate sale and ...



 
Aireng Fan
Aireng Fan Code: 1368
Brand – Aireng Motor -75kW RPM -1485 Inlet - 950Ø Outlet -660mm x 870mm Addition - Damper on outlet Rating - 25,000CFM/11800MPS



 
Flue GAs Grit Arrestor
Flue GAs Grit Arrestor Code: 1374
Age: 2000 Model No: Vortex Condition: Excellent Recent Repairs: 2 new bottom cyclone cones



 
Joulin Vacuum Lift 2
Joulin Vacuum Lift 2 Code: 3085
Joulin vacuum lift 2 Joulin type TS 1000 Vacuum lift with 3 heads. Have been used for board length 3,5 m.



 
Makor Spray Line
Makor Spray Line Code: 1458
Y.O.M. 1997 Located Country QLD.



 
Vitech Grading Stations
Vitech Grading Stations Code: 3088
Vitech grading stations 2 grading stations for sorting lines. Manufactured by Vitech AB. Used for grading of boards and centre pieces in a sorting line.



 
Waco Siba
Waco Siba Code: 3084
Waco Siba Waco Siba knife adjusting device.



 

New Equipment - Log Processing

LASAR™ 3D Lasar Scanning Sensor
LASAR™ 3D Lasar Scanning Sensor Code: OP-04-ELasar
Full coverage 3D scanning sensor with unparalled resolution and data densityThe LASAR™ sensor is a unique and rugged, full-coverage hig-resolution 3D scanner that is ideal for close coupled sawing systems and large transverse deck bucking systems.  ...



 
Log Bucking Optimizer
Log Bucking Optimizer Code: NM-OP-07-ELogBuckingOptimizer
The Newnes-McGehee (NM) Bucking Optimiser is the ideal companion for NM primary breakdown and curve sawing optimisers. The bucking optimiser uses complete optimisation algorithms rather than lookup tables to ensure optimum value recovery. Curved logs can be bucked to ...



 
MillExpert Log Optimizer System
MillExpert Log Optimizer System Code: OP-19-ELogOptimizer
Provides more value than any other systemThe Log Optimiser is part of USNR's MillWide suite of optimisation products.  It combines dense 3D scan data with the power of today's high-speed computers to let you get the maximum value from every log.



 
MillWide Bucking Optimiser System
MillWide Bucking Optimiser System Code: OP-02-EBucking
Full 3D modeling and optimisation capabilities for maximum valueWith more features, capabilities and scanning options than any other system in the industry, the MillWide Bucking Optimiser system combines dense 3D scan data with the power of today's high speed computers ...



 
Smart TriCam™ Lineal Scanning System
Smart TriCam™ Lineal Scanning System Code: OP-06-ESmartTriCamLinealb
Most Accurate and Highest-Density 3D Lineal Scanning System in the IndustryThe Smart TriCam lineal scanning system provides complete profile measurements of objects moving longitudinally through a set of scanners.  Smart TriCam sensors are available in single or ...



 

Used Equipment - Engineered Wood Products

Finger Jointing Line with Mechanisation
Finger Jointing Line with Mechanisation Code: 5001
Finger Jointing Machinery and Mechanisation Grecon 1982-1988



 
SOLD - Ledinek Parquetry Line PA3 - SOLD
SOLD - Ledinek Parquetry Line PA3 - SOLD Code: 5003
Ledinek Parquetry Line Model PA3 Y.O.M: 2017 PA3 production line has been developed for the production classic parquet of the highest quality. This line’s high production capability is its main advantage. TECHNICAL DATA Working dimensions-product ...



 

Used Equipment - Log Processing

Log Sort 2x7
Log Sort 2x7 Code: 3207
Log Sorting 2 x 7 pockets + waste pocket. Extra pockets can be added. Sawco measuring equipment from 2011-12. Metal detector. Log Crane. Frequency speed control on log haul.



 
SOLD - Log Sorting 2x18 - SOLD
SOLD - Log Sorting 2x18 - SOLD Code: 3106
Log sorting line 2x18 boxes incl. Rema electronics. 1. Log deck. 2. Scraper conveyor and belt conveyors for cleaning under log deck. 3. Step feeder. 4. Log haul conveyor. 5. Metal detector with conveyor. 6. Sorting conveyor ...



 

New Equipment - Sawmills

BioVision System
BioVision System Code: OP-23-E



 
Cambio Ring Debarker
Cambio Ring Debarker Code: E-031 CambioRingDebarker
Cambio Ring Debarker - 18" - 24" - 30" Rugged - Dependable - Economical



 
Debarker Self-Centering Infeed Conveyor
Debarker Self-Centering Infeed Conveyor Code: E-063 Debarker Infeed Conveyor
The self-centering infeed conveyor is a proven and effective method of centering the log to the debarker. The machine positions the log in both the horizontal and vertical planes, centering the log based on diameter, not weight. This enables it to maintain a true ...



 
Dynastar™
Dynastar™ Code: OP-22-E



 
Edger Maximizer System
Edger Maximizer System Code: MA-06-EEdgerMaximizerSystem
Unscrambler - Transfer - Scanner - Infeed - EdgerThe USNR Edger Maximiser System is a complete package made up of state of the art modules



 
Extended Length Infeed
Extended Length Infeed Code: E-064 ELI
Selecting the proper infeed is a critical step in the pursuit of maximum log recovery. The right infeed will deliver your log in position to make the best first cut; a cut that influences every board retrieved from the log. USNR's Extended Length Infeed (ELI) system ...



 
Forano Chip Screen
Forano Chip Screen Code: MA-46-E
USNR's Forano Chip Screen is a high capacity screen that allows your mill to take advantage of an important source of income: wood chips. The Forano chip Screen requires minimal maintenance, so you can spend your time and budget elsewhere.



 
Forano Disc Chipper
Forano Disc Chipper Code: MA-32-EForanoDiscChipper
The USNR Forano Disc Chipper is available in four sizes and three configurations to meet your specific wastewood processing requirements.  Each model can also accomodate bottom, rear and top discharge for maximum flexibility.



 
GenII™ Gang
GenII™ Gang Code: E-093 GenIIGang
GenII is the next step in the evolution of shape sawing designed by the pioneers of optimized curve sawing technology. Newnes- McGehee’s GenII gang offers many improvements to this already proven technology.



 
High Strain Horizontal Bandmills
High Strain Horizontal Bandmills Code: NM-MA-31-EHorizontalResawBandmills
Newnes-McGehee has developed simple high strain bandmills to meet any application for horizontal resaws. Thes bandmills offer hig accuracy and maximum production, yet the simple design assures minimum maintenance. They are available with 5' or 6' overhung wheels, and ...



 
High Strain Single Bandmills
High Strain Single Bandmills Code: NM-MA-29-ESingleBandmills
Newnes-McGehee has developed simple, yet multi-functional high strain bandmills for headrigs.  These bandmills offer high accuracy and maximum production, yet the simple design assures minimum maintenance.  They are available with 6' or 7' overhung wheels.



 
High Strain Twin/Quad Bandmills
High Strain Twin/Quad Bandmills Code: NM-MA-30-ETwin-QuadBandmills
Newnes-McGehee has developed simple, yet multi-functional high strain bandmills to meet any application for double length infeeds, sharp chain systems and resaws.  These bandmills offer high accuracy and maximum production, yet the simple design assures minimum ...



 
Horizontal Chipper System
Horizontal Chipper System Code: E-036 HorizontalChipper
The Horizontal Chipper is a workhorse designed for high-production mills.  Conical chip heads operate in the vertical plane which reduces side chipping forces, resulting in smoother feeding, better quality chips and longer-lasting knives.



 
HSS System
HSS System Code: E-023 HSS System
Horizontal Shape Sawing SystemThe USNR Horizontal Shape Sawing (HSS) system is the next generation of curve sawing technology that solves many of the problems associated with traditional curve sawing machines, including issues with accurace, recovery, overfeeding ...



 
Knuckle Turner Infeed
Knuckle Turner Infeed Code: E-028 KTI
Single Length Infeed with Integrated Log TurningThe USNR Knuckle Turner Infeed.  With its small footprint, integrated log turning and accurate Slew / Skew positioning, this is the obvious choice for any small log line.



 
L&B Air Strain Bandmill
L&B Air Strain Bandmill Code: E-227 LandBAirStrainBandmill
King of Bandmills, the Letson & Burpee Air Strain Bandmill from USNR



 
LineMaster G3™
LineMaster G3™ Code: OP-10-ELineMasterG3
Hardwood Lineal Edger OptimiserUSNR brings you the future of optimisation technology with the LineMaster G3™.  Packed with features that ensure the highest fiber recovery with the ability to control the appearance of your products for maximum grade ...



 
Log Positioning Infeed
Log Positioning Infeed Code: E-099 SL3000 LogPositioningInfeed
The log positioning infeed system accurately determines the shape of the log, calculates the highest-value cutting solution, then accurately rotates, positions and transports the log through the cutting tools.



 
MillExpert Edger Optimizer System
MillExpert Edger Optimizer System Code: OP-18-EEdger
Full coverage, high-density 3D scanning for lineal and transverse applications



 
MillExpert Log Turner Optimiser System
MillExpert Log Turner Optimiser System Code: OP-13-ELogTurner
Programmable Turn Increments Along with Risk and Stabilikty Analysis to Insure the Best Turn on Every Log



 
MillExpert Trimmer Optimizer System
MillExpert Trimmer Optimizer System Code: OP-20-ETrimmer
Full coverage, high-density 3D scanning and many configurable options offer superior board control.Combining dense 3D scan data with the power of today's gigh-speed computers, the MillExpert Trimmer Optimiser lets you get the maximum value from every board.  ...



 
MillWide Cant Optimizer System
MillWide Cant Optimizer System Code: OP-15-ECant
Combining dense 3D scan data with the power of today's high-speed computers, the MillWide Cant Optimiser system lets you get the maximum value from every cant.  The complete solution indludes scanning, optimisation and information management along with full ...



 
MillWide Carriage Optimizer System
MillWide Carriage Optimizer System Code: OP-16-ECARRIAGE
Simultaneous 3D front and back side scanning for hardwood and softwood applications.The LASARTM based MillWide Carriage Optimiser combines dense 3D scan data with the power of today's high-speed computers to let you get the maximum value from every log.



 
MillWide Control Systems
MillWide Control Systems Code: OP-07-EMillWideControlSystems
USNR Control Systems feature the extremely efficient Factory Wired System (FWS) of distributed I/OUSNR's Factory Wired System (FWS) is a revolutionary PLC system based on a distributed I/O system architecture.  The system uses Allen-Bradley ControlLogix ...



 
MillWide End-Dogging Carriage Optimiser System
MillWide End-Dogging Carriage Optimiser System Code: OP-21-EEDCCarriage
Simultaneous 3D front and back side scanning for hardwood and softwood applicationsThe LASARTM based End-Dogging Carriage optimiser combines dense 3D scan data with the power of today's high-speed computers to let you get the maximum value from every log.



 
Millwide Web System
Millwide Web System Code: OP-14-EMILLWIDEWEB
Data Mining and Distribution System Provides Instant Analysis of Profit and Loss Centers



 
MV Ring Debarker
MV Ring Debarker Code: E-034 MVRingDebarker
The USNR MV-Type Ring Debarker gives you excellent inline debarking performance in a great package. Our engineers have designed this debarker for maximum flexibility: our modular design means you get a custom machine at a non-custom price!



 
Norman Disc Chipper
Norman Disc Chipper Code: MA-33-ENormanDiscChipper
The exclusive, tested design of the USNR Norman Chipper is bringing greater profits to chip manufacturers around the world. Truly uniform chips are the result of the USNR Norman Chipper’s continuous cutting action that makes it the only chipper of its kind!



 
Optimization from Bucking to Grading
Optimization from Bucking to Grading Code: NM-OP-01-EOptimization
Our comprehensive suite of integrated optimisation systems harnesses technology to create innovative solutions that satisfy today's requirements and set the stage to meet the challenges of tomorrow.



 
Optimized Curved Sawing Systems
Optimized Curved Sawing Systems Code: E-072 OptimizedCurveSawingSystems
Curve sawing offers increased value, higher volume recovery, longer length side boards, and stronger lumber. Today’s advanced systems meet the challenges in speed, accuracy and recovery.



 
Optimized Edger Systems
Optimized Edger Systems Code: NM-MA-15-EOptimizedEdgerSystems
High performance edger systems offer fast, reliable and accurate sawing, while new technologies extend system  capabilities to improve downstream processes.



 
Overview
Overview Code: GE-01-EOverview
USNR is a world leader in the design, manufacturing, and installation of state of the art machinery, dry kilns, control systems, optimisation software, and high-capacity lift trucks for the wood processing industry.



 
Profiling Curve Saw Gangs
Profiling Curve Saw Gangs Code: NM-MA-13-EProfilingCurveSawGangs
Newnes-McGehee (NM) has expanded its range of curve sawing equipment to include side profiling of the jacket boards. This machine functions with any of our 3 system feed configurations: Linear, Transverse or QuickScan.



 
Quad Arbor Saw Box
Quad Arbor Saw Box Code: E-039 QuadArborSawBox
USNR's Quad Arbor Sawbox is a circular saw alternative to a quad bandmill that features the new Even Depth of Cut (EDC) technology. This innovation alleviates many of the problems commonly associated with the typical fixed arbor sawboxes.



 
RoboGang™ Curve Sawing Gang
RoboGang™ Curve Sawing Gang Code: E-094 RoboGang
RoboGang is the next step in the evolution of shape sawing designed by the pioneers of optimized curve sawing technology. The RoboGang concept allows high speed shape sawing in both horizontal and vertical orientation.USNR has applied a new concept to numerically ...



 
Rotary Hog
Rotary Hog Code: MA-31-ERotaryHog
When it comes to shredding waste material, there just isn’t any better value than USNR’s Rotary Hog. These rugged machines provide maximum production at the lowest cost per ton.



 
Sawmill BioScan System
Sawmill BioScan System Code: NM-OP-06-ESawmillBioScanSystem
Trimmer and Edger Defect ScanningHighest value optimized decisions with proven grade and recovery performance based on visual defect detection, rules based classification and highly accurate geometric measurements.



 
SGII Charger Table
SGII Charger Table Code: NM-MA-19-ESGIIChargerTable
The Super-GII charger table is the center piece of the Newnes-McGehee optimised transverse edger line.  It positions flitches accurately at very high cycle rates.  The positioning system eliminates edge crush to maximise recovery.



 
SL2500 Small Log Processor
SL2500 Small Log Processor Code: E-085 SL2500SmallLogProcessor
USNR's small log processing systems offer production rates and accuracy for today's competitive processors.  As a single source supplier, USNR provides and supports true shape scanning, intuitive controls and robust mechanical components in fully integrated ...



 
Smart TriCam™ Transverse Scanning System
Smart TriCam™ Transverse Scanning System Code: OP-05-ESmartTriCamTransverse
Most accurate and highest-density 3D transverse scanning system in the industry 



 
TrimMaster G3™
TrimMaster G3™ Code: OP-11-ETrimMasterG3
Hardwood Trimmer OptimiserUSNR brings you the future of optimisation technology with the TrimMaster G3™.  Packed with features that ensure the highest fiber recovery with the ability to control the appearance of your products for maximum grade and ...



 
Trimmer Positioning Fence & Transfer
Trimmer Positioning Fence & Transfer Code: NM-MA-08-ETrimmerPositioning
The Newnes-McGehee (NM) Trimmer Positioning Fence positions lumber accurately at very high speeds before it enters the Trimmer.



 
True Flow Knife System
True Flow Knife System Code: MA-10-ETrueFlowConical
Conical Chipper Head Knife USNR's True flow high-performance knife system is an outstanding alternative for either drumstyle or conical chipper heads.



 
True Flow Knife System
True Flow Knife System Code: MA-11-ETrueFlowDrum
Drum-Style Chipper Knife USNR's True Flow high-performance knife system is an outstanding alternative for either drum style or conical shipper heads.  The True Flow knife system was designed using sophisticated 3D solid modeling CAD software, resulting in a ...



 
USNR Carriage
USNR Carriage Code: E-020 USNR Carriage
Heavy Duty ConstructionUSNR Log Carriages continue a long-established tradition of superior construction that stands up to the most demanding sawmill environment.



 
USNR Lunden Stacker
USNR Lunden Stacker Code: E-018
The USNR Lunden Stacker is the original automatic sticker stacker, imitated by many, but matched by none.  The Lunden Stacker System features stickers on the stacker forks and lumber on the stickers when the carriage cycles.  This results in packages of great ...



 
USNR Sharp Chain
USNR Sharp Chain Code: E-194 USNR Sharp Chain



 
Vee-Chipper Canter System
Vee-Chipper Canter System Code: E-029 VeeChipper
USNR's Vee-Chipper Canter System continues a long-established tradition of bullet-proof construction that stands up to the most demanding operating cycles. This machine will stand up to the abuse of volume production for many years to come!



 
Vertical Single / Double Arbor Gangs
Vertical Single / Double Arbor Gangs Code: E-092 VSA-VDAGang
The VSA/VDA gang systems are designed to fit any gangsaw application. Built in the traditional USNR fashion, these vertical gangsaws are rugged, with easy to maintain and operate features. The many options offer customization to suit any sawmill’s particular needs.



 
VSS System
VSS System Code: E-025 VSS System
Vertical Shape Sawing SystemThe VSS cuts along an optimised path to get the greatest number of high-quality boards out of every log.  The VSS follows the wood grain more accurately, resulting in higher quality lumber than a straight sawing system.  You also ...



 
WaneMaster G3™
WaneMaster G3™ Code: OP-12-EWaneMasterG3
Hardwood Edger OptimizerUSNR brings you the future of optimisation technology with the WaneMaster G3™.  Packed with features that ensure the highest fiber recovery with the ability to control the appearance of your products for maximum grade and value.



 
WinTally
WinTally Code: NM-MA-16-EWinTally
 WinTally™ is Newnes-McGehee's solution for sorter management in the sawmill and planermill.  Production information is captured by WinTally™ as boards pass into the sorter and arrages data into an organized and logical dtabase.  Information ...



 
YieldMaster G3™ with Stereo Scan™
YieldMaster G3™ with Stereo Scan™ Code: OP-01-EYeildMasterG3
Hardwood Carriage Optimiser.The YeildMaster G3™ system scans and tapers each log precisely according to the grade and targeted products specified by the sawer using our patented StereoScan™ 3-D scanning for headrig carriages.



 
Super Chip Screen
Super Chip Screen Code: MA-19-ESuperChipScreen
The USNR Super Chip Screen makes a great addition to your mill to take advantage of an important source of income: wood chips. The Super Chip Screen requires minimal maintenance, so you can spend your time and budget elsewhere.



 
(NEW) ERJO 165 SN Chipper
(NEW) ERJO 165 SN Chipper Code: ERJO-165SN
As agents of ERJO, we are proud to be able to provide: ERJO 165 SN Chipper This chipper has many features, including: • Handles a wide range of materials • Produces uniform size fuel chips • Ideal for automatic furnace feeding • Self-feeding – safe ...



 
(NEW) ERJO 200 SN Chipper
(NEW) ERJO 200 SN Chipper Code: ERJO-200SN
As agents for ERJO, we are proud to be able to provide: ERJO 200 SN Chipper This chipper has many features, including: • Handling a wide range of materials • Produces uniform size fuel chips • Ideal for furnace feeding • Self-feeding – safe ...



 
(NEW) ERJO Type HSM Chipper Range Horizontal Feed
(NEW) ERJO Type HSM Chipper Range Horizontal Feed Code: ERJO-HSM
As agents of ERJO, we are proud to provide: ERJO Type HSM Horizontal Feed Chipper Range The ERJO Horizontal Feed Chipper Range produces pulp and board chips as well as fuel chips from edgings, slabs and trimmings. The machines are available in three (3) ...



 
(NEW) ERJO Type VS Drop Feed Chipper Range
(NEW) ERJO Type VS Drop Feed Chipper Range Code: ERJO-VS
As agents for ERJO, we are proud to provide: ERJO Type VS Chipper This ERJO Drop Feed Chipper produces pulp and board chips as well as fuel chips from edgings, slabs and trimmings. The machines are available in three (3) styles: • The Type VSF – with fan for ...



 
BioLuma™ 2900L Sensor
BioLuma™ 2900L Sensor Code: E-213 BioLuma
Highest speed transverse HD Laser profiling gives you the best overall performance in the industry. Advanced Transverse Laser Profile Scanning Precise HD laser profile scanning of boards and flitches at scan rates that will more than match today's high speed ...



 
CombiCut Disc
CombiCut Disc Code: CombiCut-Disc
CombiCut Disc is the chipperhead that combines two technologies - step chipping and spiral chipping. The disc design provides a very high proportion of quality chips, optimum surface finish, low energy consumption and safe operation at all temperatures. Tool change is ...



 
Logmaster HPS Bandmill
Logmaster HPS Bandmill Code: Logmaster-HPS-Bandmill
Logmaster HPS effectively satisfies your need for high speed bandsaw production. This design maximizes production and performance with its thin saw kerfs, and the result is excellent yields. Logmaster HPS is designed for feed speeds up to 180 m/min (590 feet/min) and ...



 
Sharp Chain Infeed
Sharp Chain Infeed Code: Sharp-Chain-Infeed
USNR sharp chain systems are designed to maximize chain life and minimize operating costs. When you’re comparing sharp chain systems there are three things you should consider: performance, durability, and operating cost. USNR sharp chain systems deliver them all.



 

Used Equipment - Sawmills

Bruks BS4 chip screen (Sokna)
Bruks BS4 chip screen (Sokna) Code: 3151
Bruks BS4 chip screen (Sokna)



 
Quad Cam Lugloader
Quad Cam Lugloader Code: 1414



 
Timber Tech White Pointer TT3 Waste Reducer with discharge screw
Timber Tech White Pointer TT3 Waste Reducer with discharge screw Code: 1437
- Comes with Augar screw conveyor - Hydraulic power pack included - Can handle waste up to one metre in length - Suitable for a range of industrial applications such as dry mill waste, plywood, particle board, cardboard and paper. Execution of Machinery o Power ...



 
8” USNR Newnes McGehee Curve Sawing Gang
8” USNR Newnes McGehee Curve Sawing Gang Code: 1439
8” USNR Newnes McGehee Curve Sawing Gang - New 1997, Model SAGCS - Porter Engineering scanner with Hermary heads - Infeed rollcase approx. 100’ long with base for scanner - Gang with 2 x 200 hp (575 volt) 1770 rpm chipping heads - Gang with 2 x 300 hp (575 volt) ...



 
A5 Nicholson Debarker Line
A5 Nicholson Debarker Line Code: 1452
Model 35IN - A5 Y.O.M. 1988 Includes: - Infeed - Outfeed - Spare main ring seals and bearings - spare roller gears - Infeed/outfeed rollers. Located Country NSW



 
AK Eriksson TB2B Twin Bandsaw
AK Eriksson TB2B Twin Bandsaw Code: 3178
AK Eriksson twin band resaw type TB2B 1400. Left hand application. Wheel diameter: 1400mm. Wheel width: 150 mm. Incl. Nobel type SBS 40 hydraulic setting for feed work. Manufactured in 1981.



 
Ånhammar Saw Mill
Ånhammar Saw Mill Code: 3198
Ånhammar Saw Mill Specification Specification Sawline. - Operators cabin - Infeed conveyor for EPC scanner and setting control system - Söderhamn 447 centering infeed with log turning device - Söderhamn reducer bandsaw with quad–bandsaws type 245, ...



 
Arasmith Industries Lily Pad Chipper
Arasmith Industries Lily Pad Chipper Code: 1454
64” x 50” mouth opening Located in Country NSW



 
Ari DS-72+1 Multi Ripsaw
Ari DS-72+1 Multi Ripsaw Code: 3125
ARI DS-72+1 multi rip saw



 
ARI KL 13 Slab Resaw
ARI KL 13 Slab Resaw Code: 3067
ARI tupe KL 13 slab resaw. Max saw blade diameter: 1,300 mm. Hydraulic drive of feed and fence rollers. Incl. main electrical motor and hydraulic power pack.



 
Ari KS-12 Scragg Saw
Ari KS-12 Scragg Saw Code: 3127
ARI KS -12 scragg saw



 
Ari SKR-600 Chipper Canter
Ari SKR-600 Chipper Canter Code: 3123
Ari SKR-600 chipper canter. Technical data Max. log diameter............................... 650 mm Min. log length........................................ 2.5 m



 
Ari Vislanda Cant Saws
Ari Vislanda Cant Saws Code: 3124
Ari vislanda cant saws for side boards and center boards with setting saws inlc. feedworks for curvesawing.



 
ATS Cyclone Dust Extractor
ATS Cyclone Dust Extractor Code: 1464
ATS Cyclone Dust Extractor Y.O.M. 2005 Includes: - 55kW fan (600mm diameter outlet) - 2 x cyclone ventilators - Horizontal transition pipework - 1 x steel platform



 
Bin Sling Sorter & 2003 Stacker for 8' Wide Packages
Bin Sling Sorter & 2003 Stacker for 8' Wide Packages Code: 1361
Sling Sorter: 48 bays sling sorter, pusher lug 1992 Bottom chain transfers Stacker: 20' Huot, high speed stacker single forks 2003, 8' wide green packages



 
Bruks 1503 M Disc Chipper
Bruks 1503 M Disc Chipper Code: 3170
Disc chipper chipper type Bruks 1503 M. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Disc diameter 1480 mm Infeed opening, 420x300 mm Number of knives 3 pcs Number of upper feed rolls 4 pcs Number of upper rolls 6 pcs Chips 30 - 50 ...



 
Bruks 800CM Chipper
Bruks 800CM Chipper Code: 3208
- Reconditioned - Bottom Outlet - 55 k/w motor



 
Bruks 803 CS Drum Chipper
Bruks 803 CS Drum Chipper Code: 3172
Drum chipper type Bruks 803 CS incl fan. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Drum diameter 800 mm Infeed opening 540x400 mm Number of knives 4 pcs Chips 30 - 60 m3/h Rated power 55 kW Rated fan power 10 kW



 
Bruks 820 CM Chipper
Bruks 820 CM Chipper Code: 2184
BRUKS stationary drum chippers are processing different kinds of input materials, like logs, slabs, sawmill wastes, butt ends, veneer wastes and other industrial wood wastes in all wood industry segments.



 
Bruks 820 CM Chipper
Bruks 820 CM Chipper Code: 2185
BRUKS stationary drum chippers are processing different kinds on input materials, like logs, slabs, sawmill wastes, butt ends, veneer wastes and other industrial wood wastes in all wood industry segments.



 
Bruks Feed Hopper
Bruks Feed Hopper Code: 3074
Bruks feed hopper with hydraulic dive, 3 kW. Volume: 6 m3.



 
Bruks RR 1000
Bruks RR 1000 Code: 3181
Bruks RR 1000



 
Bruks RR 2000
Bruks RR 2000 Code: 3182
Bruks RR 2000 The machine is in good condition, can be overhauled to excellent condition.



 
Bruks RR 400
Bruks RR 400 Code: 3180
Bruks RR 400 butt end reducer



 
Brunette MKV-35 Debarker
Brunette MKV-35 Debarker Code: 1310
Heavy duty main frame - RH One piece frame construction Eight feedrolls Four feedroll air cylinders



 
Cambio 500
Cambio 500 Code: 3098
Debarker Cambio 500 AirTen with hydraulic dampers. The machine is overhauled and in excellent condition. New feed rollers and sealings.



 
Cambio 66 Guide Work
Cambio 66 Guide Work Code: 3117
Debarker Cambio 66 guidework with hydraulic dampers. In working condition or rebuilt!



 
Cambio 70-66 BA
Cambio 70-66 BA Code: 3013
Reconditioned Cambio 66 BA with hydraulic dampers. Driveunit with new chain, sprockets, shafts and bearings. New rotor bearing. New toolholders, tools Söderhamn Camtool, all new bearings and sealings. Feedwork with new feed rollers, reinforced hubs, new gear kit ...



 
Cambio 71-75 Debarker
Cambio 71-75 Debarker Code: 2182
This is a heavy duty high capacity debarker.



 
Cambio 75 - Reconditioned
Cambio 75 - Reconditioned Code: 3158
Totally Reconditioned and Painted 30" - up to 700mm diameter logs



 
Canter-Twin Sawline
Canter-Twin Sawline Code: 1362
Canter-Twin Sawline: Kockums 6' Twin band saws 1981 shop rebuilt by USNR in 2005



 
Carriage Head Rig
Carriage Head Rig Code: 1356
Albany 1976/Cleerman 2007, 4 knees, temposonics, new in 2007, ran until 2008.



 
Chipper Canere Small Log Line
Chipper Canere Small Log Line Code: 3188
Chipper canter small log line Söderhamn log infeed, chipper canter SÖDERHAMN 240-12. 2nd chipper canter SÖDERHAMN 240 – 12. Multi rip saw Vislanda.



 
Chipping Plant
Chipping Plant Code: 3199



 
Complete Sawmill
Complete Sawmill Code: 1363
Complete sawmill. Can sell seperately (see items 1356 to 1362).



 
Dry Sorting Line - 30 Pockets
Dry Sorting Line - 30 Pockets Code: 3155
Complete Forslund drysorting line, 30 pockets. Including stacker, packpress and chipper



 
Edem Vibrating Conveyor
Edem Vibrating Conveyor Code: 1417
Edem Vibrating Conveyor Length 10.200 Width - 600 Depth – 400



 
EMS 44U
EMS 44U Code: 3192



 
ERJO 165 Drum Chipper with Feed Conveyor and Waste Hopper
ERJO 165 Drum Chipper with Feed Conveyor and Waste Hopper Code: 1447
Chipper comes complete with wood waste hopper and feed conveyor. This unit produces 7-10m3 of woodchip per hour



 
Erjo Feed Hopper Type M10
Erjo Feed Hopper Type M10 Code: 3073
Erjo feed hopper type M10. Electric drive 1,5 kW. Capacity 10-30 m3/h.



 
Forester Horizontal Head Rig
Forester Horizontal Head Rig Code: 1409
4 Inch Blade 700 mm Cutting Width Thin Kerf All new electrics Hydraulic strain



 
Forester Resaw
Forester Resaw Code: 1410
4 inch Blade Electric driven Hob Motor 15kw Chop guide is adjustable and can cut up to 500mm deep



 
Gibson Twin Breakdown Saw
Gibson Twin Breakdown Saw Code: 1448
Gibson Twin Breakdown Saw - 6ft Bottom Saw - 100HP - 5ft Top Saw - 75HP - Capacity 1.8 x 7.5 Metre - Log Deck - Winch - 3 Knee Log Carriage - All in Very Good condition.



 
Gockel G40-5475 Grinder
Gockel G40-5475 Grinder Code: 3209
Model G40-5474 Magnetic table length 2300mm Ex. Sweden



 
Gunnarssons 5m Multisaw Trimmer
Gunnarssons 5m Multisaw Trimmer Code: 1354
Gunnarssons 5m Multisaw Trimmer Model JV190 Still operational until early 2010.



 
HBS 840 Hogger
HBS 840 Hogger Code: 2129
HBS 840 Hogger Ex demonstration machine, like new Has been running approx. 25 hours Technical data: Capacity m³/h: 45 - 75 m³ Motor power: 45 - 75 kW Inlet: 840 x 670 mm Outlet: 780 x 715 mm Rotation speed: 1040 rpm Number of flails: 64



 
Head Rig 7 Foot Kockums and Carriage System Tilt
Head Rig 7 Foot Kockums and Carriage System Tilt Code: 1416
7’ Kockums with extended column CAE Carriage, 3 bunk, 42” Tilt system with slabber Operators Cab Tracks and carriage drive Voltage is 460 Volts Older scanning USNR need replacing This equipment is now dismantled and ready to ship



 
HOLYTEK GRS-320H Multirip Rip Saw
HOLYTEK GRS-320H Multirip Rip Saw Code: 1449
Technical Details: Max. cutting thickness 10~155 mm Max. cutting width 320 mm Distance from feed track center to column 660 mm Min length of cut 600 mm Feed speed (variable) 6~24 M/min Feed track width 335 mm Sawblade keyway 20mm width x 2 Distance ...



 
Horizontal ReRip Saw
Horizontal ReRip Saw Code: 1407
Horizontal Rip Saw for sale. Located in South Australia. Machine: Horizontal ReRip Saw Manufacture: Rose Machinery, Oregon



 
Iseli Mecomat 391
Iseli Mecomat 391 Code: 3130
Iseli Mecomat 391 Autoamtic levelling machine for band saw blades –manufacture 1996



 
Iseli SAM Stelite
Iseli SAM Stelite Code: 3193



 
Iseli SBM - EBW
Iseli SBM - EBW Code: 3195



 
Iseli SBM - SEM
Iseli SBM - SEM Code: 3194



 
Klamath 7' Bandmill
Klamath 7' Bandmill Code: 1311



 
Kockums Chipper Canter
Kockums Chipper Canter Code: 1461
Kockums Chipper Canter Type 240-12C Recently replaced feed rolls.



 
LH Coe 20' Optimised 3 Saw Edger
LH Coe 20' Optimised 3 Saw Edger Code: 1357
Left hand Coe, 20' optimized 3 saw edger comes with reman head, 1996 200hp top arbor, 200hp Top Chipping Head. Coe Detec Scanner Automatic Board Tailer



 
LH Optimized Trimmer
LH Optimized Trimmer Code: 1360
Left Hand Optimized Trimmer: Single board unscrambler 2000 Newnes Revolver lug loader 2000 PHL Industries 20' high speed trimmer 2000 comes with 11 motorized saws 7.5hp (saws ajustable - see pics - note pic for motor specs) D-TEC 20' optimization, scanner DTec ...



 
Lindsaw Resaw Type CR8
Lindsaw Resaw Type CR8 Code: 3057
Single split resaw made by Lindsaw. Type CR 8 incl. in feed conveyor. Max saw blade diameter = 800 mm. Max cutting height = 300 mm. 30 kW electrical motor.



 
Log Debarker Infeeder - New
Log Debarker Infeeder - New Code: 3052
New log infeed conveyor suitable for logs up to diameter 450 mm. Complete with drive unit and hydraulic power pack. Feed speed 60 m/min.



 
Log Loader with Cams
Log Loader with Cams Code: 1318
Log Loader with Cams



 
Log Sorting 2x10
Log Sorting 2x10 Code: 3187
Log sorting line 2x10 boxes incl. Rema electronics.



 
Morbark 48
Morbark 48" Chipper Code: 1420
- Length: 56” - Width: 52” - Height: 55” - Weight: 7,300lbs (approx. 3311kg) - Capacity: 11” roundwood - Spout; 26” dia x 17” wide - 48” Disc diameter - 6 Knives - Max rpm of 875 - Rear discharge "As is, where is" condition



 
Morbark 56
Morbark 56" Chipper Code: 1421
- Length: 67” - Width: 58” - Height: 65” - Weight: 8,200lbs (approx. 3720 kg) - Capacity: 15” Roundwood - Spout; 32” diag x 22” wide - 58” Disc diameter - 6 Knives - Max rpm of 725 - Bottom discharge "As is, where is". Used Condition.



 
Morbark Mobile Chipper
Morbark Mobile Chipper Code: 1467
Includes spare parts Machine Ex. Country SA



 
Newnes 20RH Trimmer Lines - 80 Bin Newnes Sorter Lines
Newnes 20RH Trimmer Lines - 80 Bin Newnes Sorter Lines Code: 1376
Two Newnes 20RH Trimmer Lines Two 80 Bin Newnes Sorter Lines



 
Newnes Optimized Board Edger RH
Newnes Optimized Board Edger RH Code: 1359
Right Hand, Newnes 20' optimized 3 saw edger comes with reman head, 1998, Newnes Scanner, updates 2004, 30" wide retec, 900 FPM, could be faster but top chip head limits, 20" diameter saw. Top Arbor, 200HP, Chip head 200HP Scanner serial # 98-281-DO, Scanner Model ...



 
Nicholson 54
Nicholson 54" Debarker Code: 1317
Nicholson 43" Model 'A;. Built in 1954, retrofitted with Nicholson 54" ring in 1992



 
Optimized Docker
Optimized Docker Code: 1355
C14_MKL CNC cross-cut system.



 
Reducer Bandsaw Line
Reducer Bandsaw Line Code: 3156
Cleaned and loaded in container, Sweden



 
Remill Guidework
Remill Guidework Code: 3184
Remill guidework for Cambio 66 and 75. In good condition.



 
Resaw-Moulding Line Animskog
Resaw-Moulding Line Animskog Code: 3197
Re-rip line with a twin line bar Soderhamn AKE resaw along with a lot of handling equipment. AKE used to build the resaws for WACO but it was the lightweight version not this one which is the heavy weight version. Location: Sweden



 
Roller Conveyors
Roller Conveyors Code: 3175
8 roller conveyor for timber packages



 
Schurman CM&E Slabber
Schurman CM&E Slabber Code: 1440
Fully serviceable unit. Skookum Technology can help with supply spare parts. - True Flow Chipping Heads. Side Head Specs: - Head RPM: 686 - 4 Knives - Chip Length – 1’ (25mm) NOM - Supplied with a 505UZ TEFC motor



 
Schurman Edger
Schurman Edger Code: 1397
6" top arbor edger Model No: 6TA48 Available early 2014



 
Signode Strapping Press 700x1280mm
Signode Strapping Press 700x1280mm Code: 1445
700x1280mm (HxW) Includes strap feeder & bearer inserter All valves and solenoids are intact and working at time of removal



 
Sling Sorting with 24 Pockets
Sling Sorting with 24 Pockets Code: 3166
Sling sorting with 24 pockets, electric motors



 
Soderhamn Combi Spiral Discs
Soderhamn Combi Spiral Discs Code: 3147
Combi spiral discs for Söderhamn chipper canter 240 - 12



 
Söderhamn Infeed Conveyor Type 447
Söderhamn Infeed Conveyor Type 447 Code: 3066
Infeed conveyor Söderhamn type 447 for installation in front of reducer band saw, band saw , reducer circular saw or chipper canter and cantfeed either round logs or cants. It has a cebtering and log turning function and consist of 2 sections, one log feeder and one ...



 
Söderhamn log haul conveyor
Söderhamn log haul conveyor Code: 3176
Söderhamn log haul conveyor approx. 16 m



 
Söderhamn profiling line
Söderhamn profiling line Code: 3185
Profiling saw line. Söderhamn chipper canter profiling line including log rotator and transport equipment between the machines.



 
Soderhömn 240-12 No 68 858
Soderhömn 240-12 No 68 858 Code: 3024
Söderhamn chipper canter type 240-12 with 2 spiral discs. Max log diameter: 500 mm. Min log length: 2,5 m. Max opening between discs: 400 mm. Canter discs can be replaced with other types when available.



 
SOLD - 36 Stenner Resaw VHL - SOLD
SOLD - 36 Stenner Resaw VHL - SOLD Code: 1348
Two 36" VHL Resaws in good condition available.



 
SOLD - 4 Head Stenner MHS 9 Horizontal Resaw - SOLD
SOLD - 4 Head Stenner MHS 9 Horizontal Resaw - SOLD Code: 1436
Ex. Europe Contact Skookum Technology for more details



 
SOLD - 5' L&B Resaw 7
SOLD - 5' L&B Resaw 7 Code: 2108
LETSON & BURPEE (USNR) 5' MOVING BAND MILL



 
SOLD - Almab Stacker - SOLD
SOLD - Almab Stacker - SOLD Code: 3174
Almab Stacker Pack size 1,2 x 1,2 m Board length 6 m



 

Contact Skookum

Phone: +64 9 276 2402
Web: www.skookum.co.nz